ZTGas Filter F100

Detail

Parameters

ZTGAS Filter F100

The F100 series stainless steel filter is used to filter mechanical impurities and grease in gas pipelines, and is used in high flow conditions.

The filter housing can be used for the installation of chromium nickel alloy and fiber filter elements, effectively reducing costs.

The bottom of the filter is equipped with a stainless steel drainage and self pressure relief device, which is convenient for maintenance and protection of pipeline safety.

Features:

Chromium nickel alloy filter element filters extremely fine impurities

Wide application range, suitable for various industrial gases

Convenient structural design for users, no need to disassemble the entire filter when replacing the filter element

Structural design facilitates gas flow with high flow rate

Complete interface specifications, convenient for users to install

Convenient structural design for users, no need to disassemble the entire filter when replacing the filter element

Structural design facilitates gas flow with high flow rate

Complete interface specifications, convenient for users to install

Reliable filter performance improves the service life of downstream equipment

Application scope:

Specially suitable for filtering grease in carbon dioxide pipelines

Applicable gas pipelines and low-temperature storage tanks for gas filtration after vaporization

Gas mixer inlet filtration

Gas treatment at the front end of semiconductor equipment.

The front and rear filtration of the adsorption dryer.

Maintenance and upkeep

The filter element must be regularly inspected and replaced if necessary

Technical Parameter

Material:	Brass, stainless steel 1.4404 or Aluminum alloy
Seat:	NBR/EPDM/FPM/FVMQ/FFKM
Max. Inlet pressure:	50 bar
Filtration rate	0.01μm •5μm • 40 μm (sintered stainless steel) Coalescente / coalescing 0,01 μm (fibra borosilicato / borosilicate fiber)
Operating temperature:	-20℃ to +60℃
Weight:	4,5kg
Connections:	Inlet/Outlet G1/2 ;G3/4;G1”OR NPT1/2;NPT3/4;NPT1”